OPEN AND FOLD THE SCOOTER
How to fold
1. Release the release lever located on the lower part of the handlebar sup-
port tube, pressing the release button and pulling the hook outwards;
2. Fully open the release lever, bringing it to 90 ° with respect to the sup-
port tube;
3. Guide the handlebar tube towards the rear wheel;
4. The handlebar is equipped with a hook: then hook the handlebar onto
the special support, located on the rear mudguard;
5. The scooter can now be transported by gripping the handlebar support
tube
How to open
1. With the scooter closed and the handlebar attached to the rear mu-
dguard, rele-ase the handlebar by acting on the hook located on the
handlebar itself;
2. Lift the handlebar in a vertical position;
3. Carefully close the locking lever, located on the lower part of the hand-
lebar support tube.
35