Scope Of Delivery; Technical Information; These Fluctuations Will Depend On The Way In Which The Power Tool Is Used - Meister MAH1500-2 Traduction Du Manuel D'utilisation Original

5452990-Abbruchham_man 13.06.17 11:59 Seite 35
GB
Operating instructions & safety hints
To prevent injury, always read the operating instructions before use and
pass them on to any future owners of the tool. Keep with the tool.
Contents
1 - Scope of delivery
2 - Technical information
3 - Components
4 - Correct use
5 - General safety
instructions
6 - Safety instructions
relating specifically to
the equipment

1 - Scope of delivery

• 1 Jackhammer with side handle
• 1 Pointed Chisel
• 1 Flat Chisel
• 1 Face Spanner
• Instruction Manual
• Warranty Certificate
• Tool Case

2 - Technical information

Technical data
Current supply
Rated power
requirement
Impact rate
Impact power
Power cord
Technical changes reserved.
Noise emission
Sound level L : 83,91 dB(A)
pA
Measuring inaccuracy: K 3 dB(A)
All manuals and user guides at all-guides.com
Page
35
35
36
36
37
40
230 V~/50 Hz
1500 W
-1
n : 900-1800 min
0
25 Joule
300 cm
7 - Installation and setting
8 - Operation
9 - Maintenance and
environmental
protection
10 - Service instructions
Sound power level L
WA
Measuring inaccuracy: K 3 dB(A)
Hand/arm vibrations
Chiseling (a ): 22,829 m/s
h,Cheq
Measuring inaccuracy: K 1,5 m/s
Noise/vibration information
Measured values determined in
accordance with EN 60745.
• The specified vibration emission value
was measured in accordance with a
normed test procedure and can be
used in order to compare one power
tool with another.
• The specified vibration emission value
can also be used for an introductory
evaluation of the exposure.
• The vibration emission value may
fluctuate from the specified value
during actual use of the power tool.
These fluctuations will depend on the
way in which the power tool is used.
Page
41
41
42
42
: 103,91 dB(A)
2
2
35