Kodak KB18 Mode D'emploi page 9

3. Pull out the film leader until the
tip reaches the
Film Leader
Film-Load
Mark
Film-Guide Rails
Lay the film flat between the film-
•
guide rails rotating the film
cartridge in the direction of the
-
FILM SPROCKET TEETH
6
- (19).
FILM LOAD MARK
(12).
Make sure the sprocket teeth
•
show through the holes on the
upper side of the film.
If the end of the film extends past
•
the film-load mark, gently push
the excess back into
the cartridge.