Symbols On The Product; Know Your Product - Ryobi RY18PW22A Traduction Des Instructions Originales

MAINTENANCE
WARNING
Use only original
replacement parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires
knowledge and should be performed only
by a qualifi ed service technician. Have the
product serviced by an authorised service
centre only. When servicing, use only
original replacement parts.
■ Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water
supply:
● before cleaning the product
● before maintaining the product
● before replacing spare parts
■ You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
■ Regularly inspect and maintain the product
for safe operation. Ensure that the battery
compartment is
tightly closed, and frequently check for
damages. Any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
■ If the product is to be stored unused for
a long period, the batteries should be
removed.

KNOW YOUR PRODUCT

See page 131.
1. 3-in-1 Nozzle
2. Release Button
3. Spray Wand
4. Lock-out Button
5. Latch
6. Battery Compartment
7. Handle Grip
8. Switch Trigger
9. Water Inlet
4 | English
manufacturer's
accessories, and
extreme care and
properly assembled,
10. Floater
11. Filter
12. Siphon Hose
13. Quick Connector

SYMBOLS ON THE PRODUCT

Warning
To reduce the risk of injury,
read and understand the
operator's manual before using
the product.
Wear eye and hearing
protection.
To reduce the risk of injury
from high-pressure injection, do
not direct spray at persons or
animals.
Kickback. To reduce the risk of
injury from kickback, hold the
trigger handle securely with
both hands when the product
is on.
The product is not suitable
for connection to the drinking
water supply without backfl ow
preventer.
Never point the spray wand to
human, animals, the body of
the product, power supply, or
any electrical appliances.
Burst hazard
Conforms to all regulatory
standards in the country in
the EU where the product is
purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity