Kodak KB28 Mode D'emploi page 9

2. Insert the flat end of the film
cartridge over the
(15). Push the other end of
SPINDLE
the film cartridge down into the
FILM CHAMBER
securely into place.
Do not force it into the
•
film chamber.
6
FILM
(12) until it fits
3. Pull out the film leader until the
tip reaches the
Film Leader
Film-Load
Mark
Film-Guide Rails
4. Lay the film flat between the film-
guide rails rotating the film
cartridge in the direction of the
-
FILM SPROCKET TEETH
- (17).
FILM LOAD MARK
(11).