Start Cleaning; Caring For Your Device - EZiclean Aqua Xpert 3.0 Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
All manuals and user guides at all-guides.com

Start cleaning

The different cleaning modes:
Auto mode
The robot performs the planned cleaning by automatically adapting to its environment.
- Turn on the main switch, when the light is on, it means that the robot is on.
- Then briefly press the robot button, the button on the remote control or from the application.
Focus mode
Adapted to the soil where the garbage is concentrated, the robot cleans the soil "spirally" and intensively.
- Then briefly press the robot button, the button on the remote control or from the application.
Border mode
Pour le nettoyage des plinthes, le robot nettoie le long des murs.
- Appuyer ensuite brièvement sur le bouton du robot, sur le bouton de la télécommande ou depuis l'application.
Manual control
Control the robot by hand by selecting the directional arrows.
- Press the directional arrows on the remote control or the application.
Suction power control
Adjust the suction power according to the different types of soil.
- Press the buttons on the remote control or from the application.
Please note: The suction power can only be adjusted in auto mode.
Stop cleaning
Standby
While the appliance is running, press the «Start / pause» button on the robot or the pause button on the remote control
or the application to stop cleaning.
Start-up
The robot goes into standby mode after 10 minutes of inactivity and all the lights go out.
Use any button on the robot or application to restart the robot.
Switch off
Once the device has stopped working, press the «start» button for a few seconds and all the indicators will go out.
If you no longer wish to use your robot for an extended period of time, set the switch to «O».
If you want to use it regularly, leave the switch on «I» so it can charge properly.

Caring for your device

To clean the dust container, follow the instructions below :
1. Press the dust bin button to
2. Open the dust container.
3. Remove the dirt.
remove it from the robot.

Publicité

Table des Matières
loading

Table des Matières