Atlas Copco Chicago Pneumatic CP 4608 P Prescriptions De Sécurité Et Instructions Pour L'opérateur page 19

CP 4608 P, CP 4611 P, CP 4608 D, CP 4611 D
♦ If there is a risk of freezing, check that the
machine's exhaust ports are not blocked.
♦ If the machine function is still not satisfactory after
this procedure, contact an authorised service
workshop.
Storage
> Clean the machine properly before storage, in
order to avoid hazardous substances. See "Dust
and fume hazard"
> Pour approximately 1 ⁄
2
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
> Always store the machine in a dry place.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
9800 0551 90e | Original instructions
oz (5 cl) of oil directly into
Safety and operating instructions
19