Maintenance, Precautions; Storage, Precautions - Atlas Copco Chicago Pneumatic CP 4608 P Prescriptions De Sécurité Et Instructions Pour L'opérateur

CP 4608 P, CP 4611 P, CP 4608 D, CP 4611 D

Maintenance, precautions

WARNING Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
Never modify the machine. Modified machines
►
are not covered by warranty or product liability.
Always use original parts, cutting blades/insertion
►
tools, and accessories.
► Change damaged parts immediately.
Replace worn components in good time.
►
CAUTION Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
Never touch a hot or sharp insertion tool.
►
Wait until the insertion tool has cooled down
►
before carrying out maintenance work.
WARNING Working tool hazards
Accidental engagement of the start and stop device
during maintenance or installation can cause serious
injuries, when the power source is connected.
Never inspect, clean, install, or remove the
►
working tool while the power source is
connected.

Storage, precautions

Keep the machine and tools in a safe place, out
♦
of the reach of children and locked up.
9800 0551 90e | Original instructions
Safety and operating instructions
11