Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2 - BLENDER FUNCTION
(depending on model)
• Place the blender jug (i) on the table.
Whenever handling the appliance, the
blender jug must always be set on the
table, never on the motor unit (a) .
• Place the ingredients you wish to mix
inside the blender bowl (i) pouring first
the liquids and then the solid ingredients,
without exceeding the maximum level:
- 1.5 for thick mixtures.
- 1 for liquid mixtures.
• Put on the lid (h) , fitted with the
measuring cap (g) , and lock it by
turning it anticlockwise (Fig. 2.a) .
• Place the blender jug (i) on the motor
unit (a) , positioning the "Pulse" button (j)
slightly to the right of the front of the
motor unit panel (a) (Fig. 2.b) . Turn the
blender jug (i) clockwise to lock it: you
need to align the square base of the
blender jug (i) with square base of the
motor unit (a) (Fig. 2.c) .
• Plug in the appliance and switch it on by
pressing the Pulse button (j) (Fig. 2.d) .
• To stop the appliance, release the Pulse
button (j) . Wait until the blades have
stopped spinning completely before
removing the blender jug (i) from the
motor unit (a) .
• Never fill the blender jug (i) with a
boiling liquid. Allow boiling liquids to
cool before processing. Caution: when
blending hot food, keep your hands
away from the lid and cap to avoid any
risk of burns.
• Always use the blender jug (i) with its lid
on (h) .
• Do not use the blender jug (i) with dry
products only (hazelnuts, almonds,
peanuts, sugar etc.).
• To add ingredients while the appliance
is working, remove the measuring cap
(g) from the lid and add the ingredients
through the feeder hole.
• Do not use the blender continuously for
more than one minute.
• Leave it to rest for a few minutes before
using it again.
Tips:
• When mixing, if the ingredients stick to
the sides of the jug, stop the machine
and unplug it. Remove the blender jug
(i) from the motor unit (a). Using a
spatula, scrape the mixture onto the
blade. Never put your hands or fingers
into the jug or near the blade.
You can:
- prepare finely blend smooth soups,
creams,
stewed
cocktails.
- prepare all kinds of liquid mixtures
(pancakes,
batters).
• The pestle (k) makes it possible to make
mixtures smoother and pack them
down (in particular thick mixtures, e.g.:
hummus, guacamole), in the blender
jug. To use the pestle, push it through
the central hole in the lid (h) of the
blender jug. While the appliance is
working, push the food towards the
blades using the pestle.
ATTENTION: Never use the pestle (k)
without the lid (h) or it could touch
the blades.
3 - COFFEE/SPICE GRINDER
FUNCTION (depending on
model)
• Add the ingredients to be ground into
the coffee/spice grinder bowl (m).
• Position the bowl (m) under the lid (l)
and lock it by turning it clockwise.When
you hear a click, the unit is properly
locked (Fig. 3.a).
• Place the bowl + lid unit on the motor
unit (a) and turn it slightly to the left to
lock it (Fig. 3.b).
• Now you can plug your appliance in.
• Press down on the lid (l) to start it up
(Fig. 3.c).
• To stop the grinder, stop pressing on the
lid (l): the appliance switches off
automatically.
• Never remove the lid (l) until the blade
has completely stopped.
8
fruit,
milkshakes,
doughnuts,
clafoutis,
Publicité
Table des Matières
