KEO KOROMO 10135467 Notice D'installation page 30

KOROMO
by KEO
1
2
1 Once the Box has been installed and that the box's electronics has been connected to the faucet, then make the connection
between the battery holder and the box electronics. By connecting the batteries the electronics launch sequence is initiated.
2 The box's red LED remains lit for 8 seconds as the sensor auto calibrates to the faucets surroundings. It is imperative that no contact is
made with the faucet and the installation during this initialisation phase (when the LED is lit) as this can impact the sensor's performance.
All manuals and user guides at all-guides.com
30