Installation Instructions - KEO KOROMO 10135467 Notice D'installation

KOROMO
by KEO

INSTALLATION INSTRUCTIONS

The Touch Capacitive Box must be isolated from any electrical equipment (cables or pipes of dishwasher, washing machine, dryer ..).
Keep the faucet isolated from neons and fluorescent light sources. All connections must be carried out in accordance with applicable standards
(EN 806-4, for example) and the instructions that are detailed within this manual. Several flushes of the water pipes must be carried out prior
to installation in order to eliminate dust, debris and residue from soldering fluxes. Water piping must be perfectly clean prior to the installation
of the box. It is essential to allow for the possibility that the box be uninstalled at a later date (ensure that hydraulic connections are accessible,
wrench passage etc.). The box must remain accessible to allow for maintenance operations (cleaning/changing filter, changing batteries for
example). Before installation turn off the water supply and check that you have all the necessary equipment.
WARNING:
All water hoses to the faucet and box must be in plastic, non conductive.
The waste water siphon must be plastic. No metal.
All parts must be installed correctly before powering up the system.
Read these instructions carefully before installing the faucet and keep it for future use.
Changes are possible in the context of technical progress.
All manuals and user guides at all-guides.com
30' 30'
30'
19