Telefunken TFL425070B Mode D'emploi page 39

Options and functions of the TV menu
Audio description
TV Automatic
shutdown
Standby search mode
(optional)
Storage Mode
(optional)
DLNA Renderer
Power Up Mode
Virtual Remote
(optional)
CEC
Turn on mode
Installation
Automatic channel
search
Manual channel
search
Network channel
search
Fine tune (analogue)
Initial Installation
Audio description refers to an extra narration path reserved for the visually and
hearing impaired. You can only use this option if the broadcaster takes it in charge.
Note: The audio sound description functionality cannot be available during recording or
when the time- lag mode is active.
When this function is enabled, it defines the time at which your television automatically
stops (between one and six hours).
If the Standby search mode is enabled, available channels will be searched when
the television is on standby. If the television finds missing or new channels, a menu
screen is displayed, asking if you wish to apply these changes or not. The channels
list is updated and edited after this process.
Enables or disables the Demo mode..
DLNA renderer feature allows you to share files stored on your smartphone. If you
have a DLNA renderer compatible smartphone and software installed, you can
share/play photos with your TV. See instructions of your sharing software for more
information. DLNA renderer mode will not be available with internet portal feature.
This setting confrigures the power up mode preference.
Enables or disables the virtual remote feature.
With this setting you can enable and disable CEC functionality completely.
Press Left or Right button to enable or disable the feature.
This parameter configures preferences of the power on mode.
Always enabled : the television comes on when the main power on/off button is pressed.
Standby: the television always comes on in standby mode. / Last view : the television
comes on on the last channel/source selected.
If you wish to install or update new channels, you can use this menu. It displays
automatic setting options. Digital antenna : Searches and stores DVB channels.
Digital cable :Searches and stores DVB cable television channels Analogue :
Searches and stores analogue stations. Analogue and digital antenna : Search
and store DVB and analogue channels. Analogue and digital cable : Search and
store analogue and DVB stations..
Used to search or directly store a channel if the frequency is known.
Searches channels related to the transmission system.
You can use this option to fine-tune analogue channels. It is only available if
analogue channels are stored.
Deletes all television settings and takes you back to the first installation.
English - 37 -