Cleaning And Storage - Maxx-world Z 08862 Mode D'emploi

EN
Crevice nozzle:
Use the crevice nozzle to vacuum in folds in fabrics, corners, recesses or other places
which are hard to reach.
Crevice nozzle brush attachment:
Place the brush attachment onto the crevice nozzle. The crevice nozzle brush
attachment cannot be used without the crevice nozzle! Use the brush attachment
to remove dust from delicate objects such as picture frames, lamp shades, keyboards,
books etc.
Short nozzle:
Use the short nozzle to remove dirt and small quantities of liquid on smooth surfaces.
4. Switch on the device using the On / Off switch. The device will start vacuuming
immediately.
5. Move the device over the area which is to be cleaned.
6. Switch off the device using the On / Off switch after you have fi nished vacuum
cleaning.

Cleaning and Storage

CAUTION!
• Make sure that the device is switched off before cleaning it.
• Never immerse the motor housing, the mains adapter or the cable in water or other
liquids.
• The device must not be connected to the mains adapter during cleaning of the col-
lecting container.
• Never use soap or other cleaning products for cleaning the dust fi lter. This would
cause damage to the fi lter.
• The fi lter is neither machine-washable, dishwasher-safe nor suitable for tumble dry-
ing! Only ever dry the fi lter in the air, and never use a hair dryer!
• Only reassemble the device once all of the parts are completely dry!
• Do not use any corrosive or abrasive cleaning agents to clean the housing. They could
damage the surfaces. If necessary, clean the housing using a slightly damp, soft cloth.
Emptying the Collecting Container and Cleaning the Filter
1. Hold the device fi rmly by the handle and keep it as horizontal as possible.
20
2. Press the release button and remove the collecting
container.