Maxx-world Z 08862 Mode D'emploi page 15

Danger of Fire
• Do not use the device if highly fl ammable gases are present in
the air.
Proper Use
• Only use and store the device in enclosed areas. Do not use the
device outdoors, in rooms with high humidity or on hot surfaces.
• Always check the device and the mains adapter for damage before
putting it into operation. If the device or the mains adapter show
visible damage, they must not be used. Do not try to repair the
device, the mains adapter or the cable yourself or to replace any
individual parts. In the event of any damage, contact our customer
service department.
• Do not use the device if it has malfunctioned or sharp foreign
bodies (e. g. shards of glass) have been sucked up or the device
has been dropped. Have the device checked by a specialist or
contact the customer service department.
• In the event of damage / faults, switch the device off immediately.
• The device should only be used when it is fully and correctly
assembled. The dust container and fi lters must be inserted. The
fi lter must not be damaged.
• Do not expose the device to extreme temperatures, wide
temperature variations, open fi re or direct sunlight.
• Do not immerse the device, the mains adapter or the cable in
water or other liquids.
• Do not drop the device or allow it to be knocked violently.
• Do not insert anything into the openings / nozzles of the device
and make sure that these do not become clogged.
• Never leave the device switched on when it is unsupervised.
• Switch off the device immediately
– if you stop working with the device for a period of time,
– if you are no longer using the device,
– before you change the nozzles,
– if a fault or error occurs while the device is in operation,
– if foreign bodies have found their way into the device,
15 EN