How To Operate - NOSTALGIA PRODUCTS CIT3PLSAQ Manuel D'instruction

HOW TO OPERATE

To remove any manufacturing residues in the appliance, we recommend running at least
one brew cycle, with water only, through the appliance. Follow the directions in the
HOW TO BREW section of this manual, but do not use any tea, coffee, fruit or other
ingredients.
TO AVOID SMOKING DO NOT TURN ON UNTIL WATER
Place the appliance on a dry, level, heat-resistant surface, away from any edge. DO
1.
NOT PLUG IN.
2. Fill the pitcher with fresh, cold water to the WATER line marking. Lift the Top Cover and
pour water into the Water Reservoir.
NOTE: DO NOT exceed MAX water line on inside of Water Reservoir. If
too much water is poured into the Water Reservoir, it will overflow into
the Filter Basket and down the back of the body of the unit.
3. Set the Flavor Extraction Chamber in place.
4. Place your coffee grounds, tea bags or loose tea in the Flavor Extraction Chamber
according to the Coffee & Tea Measurement Guide below. You may tweak the
measurment suggestions to fit your personal taste and strength preference.
Coffee & Tea Measurement Guide (Makes 2 Quarts)
Tea Bags (regular size)
Tea Bags (family size)
Loose Tea
Green Tea Bags (regular size)
Herbal Tea Bags (regular size)
Ground Coffee
• GROUND COFFEE: Fill the Filter Basket with coffee grounds
and place into the Flavor Extraction Chamber.
• LOOSE TEA: Fill the Filter Basket with loose tea and
place into the Flavor Extraction Chamber.
• TEA BAGS: Fill the Filter Basket with tea bags and
place into the Flavor Extraction Chamber.
• SWEETENED TEA: Place a basket-style coffee filter into the Flavor Extraction
Chamber, then add tea bags or loose tea, and up to 1 cup of sugar into the
coffee filter. Some sugar may remain in the Flavor Extraction Chamber after
the brew cycle has completed, this is normal. Sugar dissolves better with loose
tea than bag tea. The Filter Basket is not used when making sweet tea.
5. Close the Top Cover.
6. Adjust the Brew Strength Selector Dial to your desired strength (1 = mild to 8 = strong).
7. Fill the Pitcher with ice cubes to the ICE line marking.
NOTE: If you want to use cold water in place of ice, fill the
Pitcher with water to the WATER line marking.
8. Place the Pitcher on the Drip Tray. Your beverage can be
brewed with or without the Pitcher Lid in place.
9. Plug the electrical cord into a nearby outlet, then press the Power Button. The Indicator
HAS BEEN ADDED TO WATER RESIVIOR
6 to 9 bags (2g)
2 to 3 bags (6-7g)
1 to 3 tablespoons, depending on type
6 to 9 bags
6 to 9 bags
8 to 12 tablespoons
6