How To Operate - NOSTALGIA PRODUCTS PT300RETRORED Consignes Et Recettes

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com

HOW TO OPERATE

Now that you have cleaned and reassembled your '50S-STYLE ELECTRIC
TWISTER & PEELER, peeling, spiraling and shredding is both easy and fun!
NOTE: Using the correct Cut Fork/Peel Fork and Blade is extremely
important. Incorrect use may damage the appliance.
SHRED
1.
To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch Release
button and move Peeling Arm to end furthest from Fork Mount. Be sure Peeling
Arm Release is in the down position. NOTE: If you want to simultaneously
peel and shred, be sure Peeling Arm Release is in the up position.
2.
Attach Cut Fork to Fork Mount by aligning notches on Cut Fork to grooves
on Fork Mount, then twisting the Cut Fork clockwise to secure.
3.
Follow section on "ATTACHING BLADES TO BLADE MOUNT" on page 8 to attach
Small Shredded Blade or Medium Shredded Blade to Blade Mount.
4.
Press end of potato into center of Cut Fork.
5.
When ready to peel, slide the Power Button to Drive/ON and
the Shredded Blade will begin to shred your potato.
6.
When done shredding, slide the Power Button to Twist/OFF.
7.
Carefully remove remaining potato from '50S-STYLE ELECTRIC TWISTER & PEELER.
8.
Repeat steps 1-8 to shred additional potatoes.
9.
When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut Fork by
twisting counter-clockwise and pulling away from the Fork Mount.
PEEL
1.
To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch
Release button to slide Peeling Arm to end furthest from Fork Mount.
2.
Carefully push end of potato into points of Peel Fork, making sure it is centered.
Next, attach Peel Fork to Fork Mount by aligning notches on Peel Fork to
grooves on Fork Mount. Twist Peel Fork clockwise to secure into place.
3.
Move the metal Peeling Arm Release to the up position
so that the Peeling Arm can move freely.
4.
When ready to peel, slide the Power Button to Drive/ON and
the Peeling Arm will begin peeling the potato.
5.
When done peeling, slide the Power Button to Twist/OFF.
6.
Return the Peeling Arm to its starting position and carefully remove the Peel Fork
and peeled potato from the Fork Mount. Slide potato off points of Peel Fork.
7.
Repeat steps 1-5 to peel additional potatoes.
8.
When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Peel
Fork by twisting counter-clockwise and pulling away from the Fork Mount.
6

Publicité

Table des Matières
loading

Table des Matières