Samsung Blu-ray BD-E5500 Guide D'utilisation page 30

Appendix
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud
noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the coaxial and HDMI audio output when your player is connected to an AV
receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of
your Digital Output selections (PCM or Bitstream).
PCM Downsampling
Settings
• Even when PCM Downsampling is set to Off, some discs will only output
downsampled audio through the coaxial digital outputs.
• HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital,
DTS), the player may output PCM 2ch downmixed audio even though you selected
Bitstream (either Reencoded or Unprocessed) in the setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the player may
output 48kHz.
BD-LIVE Internet Connection
• What is a valid certificate?
When the player uses BD-LIVE to send the disc data and a request to the server to
certify the disc, the server uses the transmitted data to check if the disc is valid and
sends the certificate back to the player.
• The Internet connection may be restricted while you are using BD-LIVE contents.
| 30
English
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to
the user manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
Settings
• In the external memory mode, disc playback may be stopped if you disconnect the
USB device in the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are
supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
conditions.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not
contain any BONUSVIEW audio settings.
Media Play • The languages available through the Audio Language function depend on the
languages that are encoded on the disc. This function or certain languages may not
be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio
soundtrack in English.