Hendi 222157 Mode D'emploi page 6

Transportation
• Do not move the appliance while it is under op-
eration. Unplug the appliance when moving to
another place.
Operation
Observe the following safety advice at all times!
• Always ensure the appliance is disconnected
from the power supply before it is assembled with
the blending part (7).
• Never put your hands into the food container (not
supplied). Always use wooden or plastic spatulas,
and only when the appliance is not running.
Assembling / Disassembly of the attachments
The assembly / disassembly operations of the appliance are performed with the appliance stopped and
disconnected from the power supply.
Main unit (10) and blending part (7):
EN
Disassembly:
1. Hold the main unit (10) and screw out the blend-
ing part (7) by clockwise until it is fully detached.
6
10 7
Clutch
• Hold the handle part of the appliance when mov-
ing away.
• Do not operating the appliance with no foodstuff
inside the container or with hard foods, hot liq-
uids, heavy dough, etc.in order to prevent over-
heated.
• WARNING! Unplug the appliance immediately
after use.
Assembly:
1. Align the coupling of the blending part (7) to the
clutch of the main unit (10).
2. Screw in the blending part (7) by anti-clockwise
until it is fully tightened.
Coupling