Hendi 222157 Mode D'emploi page 5

• Lay out the power cord in such a way that no unintentional pulling or tripping over is
possible.
• Do not clean or store the machine unless it is completely cooled down.
• Danger of injury! Care should be taken when handling the sharp cutting blades during
cleaning.
• This appliance is classified as protection class II.
Intended use
• This appliance is intended for professional use.
• This product is a hand-held appliance designed
to process foodstuff in a container. Any other use
may lead to damage of the appliance or personal
injury.
Main parts of the appliance
1. ON/OFF switch : Press and hold for contin-
uous operation; Release the button to stop op-
eration
2. Increase speed setting + :
Increase speed between 1 to 6
3. Decrease speed setting - :
Decrease speed between 1 to 6
4. LCD display: To show the speed setting
5. Handle
6. Ventilation holes
7. Detachable blending part
8. Blade
9. Blade guard
10.Main unit with motor
Preparations before operation
• Remove all protective packaging and wrapping.
• Check the appliance for completeness and trans-
port damages. In case of incomplete delivery or
damage, contact supplier immediately. DO NOT
use the appliance. (See ==> Warranty).
Before operation
• Read this manual thoroughly and carefully before
operation.
• Ensure the appliance is placed in a dry area with-
out any obstacles to block your operation.
• Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
• Clean the appliance before use (See ==> Cleaning
and Maintenance).
• Make sure the appliance is completely dry.
• Preparation of the food ingredients for process-
ing.
• Check to ensure the electrical power supply cor-
responds with the rating label on the appliance.
• Make sure the blending part (7) is installed firmly
with the main body with motor part (10).
EN
5