Using The Z-Star™ Manual Drive With The Solo Star™ Juicer - Keimling Z-Star Mode D'emploi

All manuals and user guides at all-guides.com
Z-Star™ Manual Juicer and Manual Drive Z-Star™
Manual Drive Z-Star™
1. Slide the Auger Housing Retaining Ring of your Solo Star™ onto the shaft of the Auger and insert
this into the opening on the base of the Z-Star™ Manual Drive.
2. Slide the Auger Housing over the Auger and into the Auger Housing Retaining Ring on the Ma-
nual Drive
3. Depending on intended use, select the appropriate Screen or the Homogenising Screen of your
Solo Star™ (details about this found in the User's Manual of your Solo Star™ Juicer).
4. Set the Funnel onto the Auger Housing. Place the Juice Container under both Juice Outlets and
the Pulp Container underneath the juicer or homogenising attachment.
5. Using the Plunger to help you, fill the food to be juiced into the Funnel in small portions. Fruit
and vegetables should be cut into lengthwise pieces before juicing.
Using the Z-Star™ Manual Drive
with the Solo Star™ Juicer
The Manual Drive optimally complements the juicing
technology of the Solo Star™ Juicer. Both devices are
from the same manufacturer and constructed so that
the Solo Star™ can also be used with the Manual
Drive of the Z-Star™. This makes it optimal for Solo
Star™ owners who do not want to rely on electricity
or the correct voltage on holiday, for example.
To take advantage of this convenience, just use the
attachment from the Solo Star™ together with the
Manual Drive of the Z-Star™.
For parts that are included in delivery of the Solo
Star™, please read the relevant instructions in the
User's Manual of the Solo Star™. For all parts that ex-
clusively pertain to the Manual Drive, you will find
all important information in this User's Manual.
19