External Bidet Filter Installation - brondell SWASH CL950-EW Manuel De L'utilisateur

PRODUCT INSTALLATION

External Bidet Filter Installation

NOTE: Customers with hard water, well water, and softened water
can extend the life of their bidet seat by purchasing and installing
an external inline water filter to be used with the Swash. The bidet filter
should be changed every six months, and can be purchased online
at brondell.com.
1. Turn Off Water Supply Valve and Flush Toilet.
a. Turn water valve off to stop the flow of water.
b. Flush toilet and hold down handle to completely empty tank.
2. Disconnect the Bidet Hose from the T-Valve
3. Connect the female end of the Swash Filter to the open
T-Valve connection.
4. Connect the Bidet Hose to the male end of the Swash Filter.
5. Turn the toilet water supply valve back on.
Step 2
FLOW
Step 3
FLOW
Step 4
15