Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Blinking Red LED Indicator?
1. Remove the battery from the charger, and:
a. make sure that it is a Motorola Solutions authorized
battery listed in Table 1. Other batteries may not
charge.
b. remove the battery from the charger and use a
pencil eraser to clean the three metal contacts at the
back of the battery. Place the battery back in the
charger.
2. Power up the charger and place the battery back into
the charger pocket. If the LED indicator continues to
blink red, replace the battery.
Blinking Yellow LED Indicator?
– the battery temperature may be below 5 °C (41 °F) or
above 40 °C (104 °F).
– the battery voltage may be lower than the predetermined
threshold level for rapid charging.
Note: Rapid charging outside of the stated temperature and
voltage limits can drastically reduce the life
expectancy of the battery.
Note: When the battery charger detects the proper battery
conditions, rapid charging begins automatically
(steady red LED).
10
Publicité
Table des Matières
