Mounting The Handles On Stainless Front; Ventilation - Fhiaba Integrated Serie Notice D'installation

3
> Reposition the bracket and fix it first to the cabi-
net and then to the wall [ 4
4
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to
the wall by means of two special brackets.
7.2 Mounting the handles
on stainless front
To mount the handles onto the door and
the drawer operate as follows:
Operate as follows:
> Insert the two handle spacers onto the supports
already available on the door and the drawer
1
All manuals and user guides at all-guides.com
].
[ 1 ].
www.fhiaba.com · info@fhiaba.com
> Screw in the Allen screws available on the handle
2
The screws must be tightened in by means of a
2.5 mm (1/8") hex wrench.

7.3 Ventilation

INTEGRATED AND CLASSIC SERIES
A forced air system assures ventilation through a
grille positioned in the lower front part of the unit. If
the kitchen design includes a kickplate, the latter has
to be punched in order to maintain a satisfactory air
flow, as described in the drawing.
Holes can be in any shape and size, as long as the
total area of the punched part equals 50% of the
kickplate are.
In this case, to guarantee a better air flow, it is
advisable to remove the front grille included with
the unit. The grille is secured to the unit with ma-
gnetic plates and can be easily removed even by
the end user, to provide for regular cleaning pro-
cedures and remove dust.
If the grille is partially covered by the kitchen
kickplate, it is advisable to remove the grille in
EN EN
[ 2 ].
33