Energy: Alternatives And Home Automation - Fhiaba Integrated Serie Notice D'installation

elbow adapter for connecting a 1/4" copper or poly-
ethylene source water line to the appliance.
Do not use extension cords and/or mul-
tiple adapters for the power supply con-
nection.
ELECTRICAL AND WATER SUPPLY
BEHIND THE UNIT
INTEGRATED
AND BRILLIANCE SERIES:
E
W
3.3 Energy: Alternatives
and Home Automation
If energy is supplied through an alternative en-
ergy power source (solar, geothermal, etc..) or
if home automation systems are installed, it is
necessary to install the Alternative Energy Kit to
integrate the unit into the power grid.
INTEGRATED AND BRILLIANCE SERIES:
Electrical connection
Water connection
fig.1 Back of appliance
All manuals and user guides at all-guides.com
STANDPLUS AND X-PRO
SERIES:
E
W
www.fhiaba.com · info@fhiaba.com
Operate as follows:
> Unwind the electric cable and connect it directly to
the wall socket.
> Make sure the appliance is in the Stand-by con-
dition and that all lights are off; should it be not so
press the Unit button to switch it off.
> Fit one end of the water hose onto the connector at
the appliance's back [ 1 ] .
1
> Fit the other end of the hose to the water tap, use
the gaskets provided in the Owner's Kit
STANDPLUS AND X-PRO SERIES:
Electrical connection
Water connection
fig.2 Back of appliance
Operate as follows:
> Unwind the electric cable and connect it directly to
the wall socket.
> Make sure the appliance is in the Stand-by con-
dition and that all ights are off; should it be not so
press the Unit button to switch it off.
> Connect the water line to the threaded connection
at the base of the unit, as in figure
1
fig.3 Front of appliance
EN EN
2
[ 2 ].
[ 1 ].
13