NOSTALGIA PRODUCTS PT300RETRORED Consignes Et Recettes page 9

All manuals and user guides at all-guides.com
SPIRAL
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch
Release button and move Peeling Arm to end furthest from Fork
Mount. Be sure Peeling Arm Release is in the down position.
2. Attach Cut Fork to Fork Mount by aligning notches on Cut Fork to grooves
on Fork Mount, then twisting the Cut Fork clockwise to secure.
3. Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4. Press end of potato into center of Cut Fork.
5. When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
6. When done spiral cutting, slide the Power Button to Twist/OFF.
7. Carefully remove remaining potato from Cut Fork and the spiraled
potato from '50S-STYLE ELECTRIC TWISTER & PEELER.
8. Repeat steps 1-8 to spiral additional potatoes.
9. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut
Fork by twisting counter-clockwise and pulling away from the Fork Mount.
SPIRAL ON A STICK
1. To prepare '50S-STYLE ELECTRIC TWISTER & PEELER, hold down Clutch Release
button and move Peeling Arm to end furthest from Fork Mount. Be sure Peeling
Arm Release is in the down position.
2. Attach Cut Fork to Fork Mount by aligning notches
on Cut Fork to grooves on Fork Mount, then
twisting the Cut Fork clockwise to secure.
3. Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4. Next, carefully pierce center of potato, lengthwise, with
pointed end of Bamboo Skewer. Stop when pointed
end of Bamboo Skewer reaches end of the potato.
5. Thread visible end of Bamboo Skewer through hole near top of Spiral Blade and notch
cutout on top of end panel. Center and press end of potato into center of Cut Fork.
6. When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
7. When done spiral cutting, slide the Power Button to Twist/OFF.
8. Carefully remove potato from '50S-STYLE ELECTRIC TWISTER & PEELER
and evenly fan out potato spirals on Bamboo Skewer.
9. Repeat steps 1-8 to spiral additional potatoes.
10. When done using the '50S-STYLE ELECTRIC TWISTER & PEELER, detach the Cut Fork by
twisting counter-clockwise and pulling away from the Fork Mount.
When finished using '50S-STYLE ELECTRIC TWISTER & PEELER, follow section on "REMOVING
BLADES FROM BLADE MOUNT" on page 8 to remove Blades from Blade Mount.
7