Assembly Guidelines - EUROKRAFT 516035 49 Mode D'emploi

3.2 Assembly guidelines

Safety measures at the place of installation:
• Ensure a stable installation
• Use only on level, flat, firm floors.
• Pay attention to the load bearing capacity of the floor.
• Avoid crush and shearing points between the lifting unit and
surroundings. Pay attention to the minimum clearance in
accordance with EN 349.
• Minimum clearances must also be observed to moving,
neighbouring parts.
• Make sure that the place of installation is kept clean and tidy.
• A clear view of the lifting unit must be guaranteed at all times.
• The lifting unit must be installed in such away that the noise of
its operation is not amplified.
• Transportation routes must be kept clear.
Have you read and understood the instruction
manual and above all the safety instructions?
If so, you can now start work with the device.
Operating instructions
11