ENG
3.4.4
Flat duct system (option)
WARNING
Danger of fire due to short-circuits
Formation of condensate in the switch cabinet can lead to a fire risk due to short-circuits.
Condensate can form on the flat duct system.
•
Check the flat duct system in the switch cabinet regularly for condensate formation.
•
Shut down the unit immediately and inform your superiors if condensate forms.
•
Find and remedy the cause of the condensate formation (e.g. switch cabinet not sealed tightly).
Fig. 4: Flat duct system
The flat duct system (2) supports the air distribution in confined switch cabinets. It ensures optimized cooling unit capacity with
adapted current consumption. The flat duct system (2) is used with a PAD-frame (1).
Operating Manual | Roof-mounted Cooling Unit | Standard Controller (SC) – 115 V | 086100026b
G00029
14/15