Binatone Solo Plus Mode D'emploi page 38

10.3 DEREGISTER your Handset
You can deregister the handset you are using.
1. From the home screen, press
2. Press +
3. Press +
M
4. Press
5. Press +
and then press
deregistration procedure.
• A confirmation tone will play to indicate successful
deregistration.
• If no buttons are pressed the handset within 15 seconds, the
deregistration procedure will be aborted and the handset will
return to standby mode.
10.4 Change the Recall Time
You may need to press
Recall or Timed Break Recall) if you are connected to a PBX. You should
normally leave the Recall Time at its default setting, LONG (600ms), as
this is the standard recall required in the telephone network. However, it
can be changed to Medium (270ms) or SHORT (100ms) if your telephone
is connected to a PBX that requires a different recall time.
1. From the home screen, press
2. Press +
3. Press +
4. Press +
M
press
A confirmation tone will play.
•
O
5. Press
/ - to SETTINGS and then press
-
/ to DEREGISTER and then press
to confirm.
-
/ to select the handset number to un-register
M
to confirm or press
or
/ - to SETTINGS and then press
/ - to RECALL TIME and then press
-
/ to select SHORT, MEDIUM or LONG and then
to confirm.
to return to standby mode.
M
.
O
to send a Flash signal (also called
M
.
38
M
to select.
M
to select.
to cancel the
M
to select.
M
to select.