Adjust Speaker Volume; Switching The Handset On/Off; Important - Binatone Solo Plus Mode D'emploi

4.5

Adjust Speaker Volume

There are 5 levels of speaker volume.
1. During a call, press
VOLUME 5.
• The current setting is shown.
• When you end the call, the setting will remain at the last
selected level.
4.6 Mute/Unmute the Microphone
When the microphone is muted, the handset will display MUTE ON, and
your caller cannot hear you.
1. During a call, press
4.7 Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
1. Press the
• All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on a handset or the
under the base unit again.
4.8

Switching the Handset On/Off

Press and hold
off in standby mode.
When first turned on, the display shows SEARCHING... until the
•
handset finds the base.
Note: You can switch the handset off to save battery life if the handset is
not on the base or a charging pod and you do not want to use it for a
while.
IMPORTANT: When the handset is OFF, it cannot be used for making calls
including emergency calls. It will not ring when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
+
m
key under the base unit.
O
for more than 2 seconds to switch the handset on or
-
/ to select from VOLUME 1 to
to turn on/off the microphone.
19
key