Binatone Solo Plus Mode D'emploi page 37

10 SETTINGS
10.1 Handset Registration
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset's number (1 to 4) shown on its display.
Note: Each handset can only be registered to one base.
Note: After de-registrater all handset, it can charge the handset in power
saving condition.
10.2 Register Additional Handsets
1. Press and hold the
seconds.
The message indicator on the base will flash for up to 1 minute
•
while it is in registration mode.
2. On the handset, press
+
3. Press
+
4. Press
If no key is pressed on the handset within 10 seconds, the
•
registration procedure will be aborted. If this happens, repeat
from step 1.
M
5. Press
WAITING will flash on the screen.
•
• A confirmation tone will play to indicate successful registration,
and the handset will return to standby mode with its handset
number displayed.
If no base is found, error tones are played to indicate failed
•
registration and the handset returns to standby mode. You will
need to repeat the registration process from step 1 above.
key under the base unit for approximately 5
M
-
/ to SETTINGS and then press
-
/ to REGISTRATION and then press
to confirm.
.
37
M
to select.
M
to select.