Date And Time Settings - Binatone Solo Plus Mode D'emploi

8 CLOCK AND ALARM SETTINGS
8.1

Date and Time Settings

If you have subscribed to Caller ID service, the time and date settings will
be automatically updated by the network when you receive an incoming
call.
You can also set the date and time manually.
1. From the home screen, press
2. Press +
M
3. Press
The last stored date will display.
•
4. Enter the current date and press
format is MM/ DD. (To change date format, see Change the Date
Format on page 31.)
For DD/MM format, enter 03 May 2012 as [1], [2], [0], [3], [0], [5].
For MM/DD format, enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
If you make a mistake, press
5. Enter the current time and press
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press
select AM or PM.
If you make a mistake, press
A confirmation tone will play.
•
O
6. Press
-
/ to CLOCK&ALARM and then
again to select DATE & TIME.
to return to standby mode.
M
.
M
to confirm. The default date
m
to delete the last digit entered.
M
to confirm.
m
to delete the last digit entered.
30
M
to select.
+ -
/
to