Smartpond 52268 Mode D'emploi page 10

PUMP
Regular cleaning of the pump may be necessary depending upon
the environment which it is operated. Clean the pump when it is
visibly soiled or when a drop in performance is detected. Clean
pump in 4 easy steps!
Step1: Before cleaning,
always disconnect the
pump from the power
source and remove the
pump cover.
Step 2: Remove the
impeller cover to expose
the impeller assembly.
Remove the impeller
assembly by gently
pulling on the impeller
blades. The impeller
is held in place by a
magnet.
Step 3: Use a soft cloth
or brush and warm water
to clean the impeller and
the inside of the impeller
housing.
Step 4: Reassemble all pump parts and place in water before
reconnecting to the power source.
7 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.