Table des Matières
Publicité
2
Buttons description
C
Note: The remote controller display all symbols during power-on and only those
corresponding to current operation the rest of the time.
1. ON/OFF button
• Press this button to turn on/off the unit.
• This will clear the existing timer and SLEEP settings.
2. MODE button
• Press this button, you can select the running mode as follows:
C
Note: HEAT mode is not available for cool only units.
3. TIMER button
• With the unit ON, press this button to set OFF timer or with it OFF to set ON timer.
• Press this button once, a "ON (OFF)" will flash. Press "+" or "-" to set the number of hours in which
the unit will be turned ON/OFF, with an interval of 0.5 hour , and a range of 0.5-24 hours.
• Press it again to confirm the setting, the "ON(OFF)" will stop flashing.
• If the timer button is not pressed longer than 10 seconds after the "ON (OFF)" start flashing, the
timer setting will be exited.
• If a timer setting is confirmed, pressing this button again will cancel it.
6 / 24 EN
5
COOL
SPEED
4
HEAT
TIMER
SLEEP
10
MODE
ON/OFF
SWING
AUTO
COOL
DRY
6
8
°C/°F
2
MODE
3
7
1
9
HEAT
FAN
Remote controller / User Manual
Publicité
Table des Matières
