Sony MPK-DVF3 Mode D'emploi page 8

Preparation (continued)
7
Prepare to record.
Before installing the marine pack to the camcorder, prepare the camcorder for
recording.
1 Set the POWER switch to
2 Set the COMMANDER
3 Cancel the following functions:
4 Slide the AUTO LOCK switch
5 Select V-OUT/LCD in the
For DCR-TRV6E/TRV8E/TRV9E/TRV10E/TRV11E/TRV20E/
TRV890E/TRV900E
1 Set the POWER switch to
2 Set the COMMANDER
3 Cancel the following functions:
4 Set the FOCUS switch to AUTO.
5 Select V-OUT/LCD in the
* If your camcorder has REC lamp switch, set the REC lamp to OFF. By using this
8
-GB
For DCR-TRV7E
CAMERA.
to ON in the menu system.
BACK LIGHT, Night Shot,
PROGRAM AE, and Picture
Effect.
up to AUTO.
DISPLAY menu and press the
DISPLAY button on your
camcorder before installing it to
the marine pack.
CAMERA.
to ON in the menu system.
BACK LIGHT, Night Shot,
PROGRAM AE, and Picture
Effect.
DISPLAY menu and press the
DISPLAY button on your
camcorder before installing the
marine pack.
function, the light of the lamp is not reflected in the lens. For details, please refer
to the operating instructions supplied with your camcorder.
AUTO LOCK
switch
MENU button
FOCUS switch
MENU button
POWER switch
POWER
switch