Sony MPK-DVF3 Mode D'emploi page 12

Preparation (continued)
2
3
4
5
Now you have finished the preparations. Be sure to check that the equipment
operates correctly and that there is no water leakage before you dive (see page 16).
12
-GB
Insert the camcorder until the
mounting shoe clicks into place.
For DCR-TRV6E/TRV8E/
TRV9E/TRV10E/TRV11E/
TRV20E/TRV890E/TRV900E
Connect the monitor cord to the
jack of camera mounting shoe B.
The cords are placed in the plug
holders of the marine pack at the
factory. Pull the plugs out of the
holders when in use.
Attach the front shell to the rear
shell. Hold both shells firmly and
fasten the 3 latches securely.
Take care not to pinch the
remote, microphone, and monitor
cords. If this happens water may
leak in.
For details on handling the O-ring,
see page 20.
Attach the grip.
Fasten the screw tightly.