Technical Specifications - Meta System Whad 1500 Manuel D'installation Et D'utilisation

V81608A Ist.Uso Whad2000:V81608A Ist.Uso UPS Whad2000
Construction specifications
Weight
Size L x H x P in mm
Technology
Computer interface
Protection features
Internal, synchronised bypass
Environmental specifications
Maximum altitude for storage
Storage temperature range
Operating temperature range
Range of relative humidity for operation
Grade of protection according to IEC529
Noise level at 1 metre
Nominal input voltage
Nominal input voltage
Range of input voltage (nominal load)
Range of input voltage (50% nominal load)
Nominal input frequency (selectable by the operator)
Nominal input current
Maximum input current
Distortion of input current
with nominal load
Input power factor
In-rush current
Number of input phases
Line fuse
All manuals and user guides at all-guides.com

TECHNICAL SPECIFICATIONS

Whad 1500
PWM high frequency both for input stage and output stage.
Standard serial RS232 for interfacing with personal computer
using the diagnostic software supplied, output to 9 pin, female,
SELV insulated, DB9 connector
Electronic protection against overloads, short circuits and
excessive battery discharge.
Operation block at end of autonomy.
Inrush current limitation when switching on.
Sensor for correct neutral connection
Back feed protection (electrical insulation for the safety of
the input plug during operation in battery mode)
Intervenes in case of overload and operation anomaly
From 184V to 265V
From 100V to 265V
50Hz/60HZ +/- 5%
5,3 Arms
6,8 Arms
<3%
Automatic
resettable 20A
17
8-04-2008 9:52
Whad 2000
25Kg
160 x 460 X 420
Microprocessor control logic
Automatic
1000 metres
from -20°C to +50°C
from 0°C to 40° C
From 20% to 80% non condensing
IP21
42 dBA
230V
From 184V to 264V
From 110V to 264V
50Hz/60HZ +/- 2%
7,4 Arms
9 Arms
<10%
>0.99 at 80% of nominal load
100% of nominal current
Single phase
20 A FF
Pagina 17
Whad 2500
9,2 Arms
11,4 Arms