Important - Matrix 150.200.040 Mode D'emploi

authorised workshop.
- Only connect the pressure cleaner to an earthed
socket.
SWITCH ON THE PRESSURE CLEANER
IMPORTANT: Adhere to the sequence of steps.
1. Connect the pressure cleaner to the mains. 230
V~/50 Hz. See the model plate for the voltage
specification.
2. Open the fresh water supply.
3. Switch on the pressure cleaner at the ON/OFF
switch (6) (B5.
4. Release the lock on the handle of the fitted
pressure lance and press the trigger (B4).
5. IMPORTANT: Never direct the water jet at peo-
ple, animals or sensitive items.
- Never allow children or people who are not
familiar with the tool to operate the pressure
cleaner without supervision.
SWITCH OFF THE TOOL
IMPORTANT: Adhere to the sequence of steps.
1. Switch off the pressure cleaner at the ON/OFF
switch (6).
2. Pull the mains plug.
3. Close the water supply.
4. Press the trigger on the lance handle until no
more water comes out of the nozzle. This releases
the pressure from the tool.
5. Disconnect the fresh water supply (5) from the
pressure cleaner.
6. Engage the safety lock on the lance handle (B4)
and keep the lance in the tool case.
7. Wipe the pressure with a cloth to dry it.
IMPORTANT: Always switch off the tool first and
then shut down the water supply.
If the pressure cleaner is operated without
water, the motor and pump may suffer
irreparable damage.
Adjust the spray nozzle
Switch off the pressure cleaner before you attempt
to adjust the nozzle.
You can adjust the jet width and pressure by
All manuals and user guides at all-guides.com
turning the nozzle head (B6) clockwise or anti-
clockwise. This will enable you to clean various
surfaces effectively and without damaging them.
Water supply
Check the inlet screen on the water supply at
regular intervals (5).
If necessary clean the screen carefully using a
needle or soft brush.
How to use the integral cleaning product tank
(B7)
• Place the cleaning product in the cleaning
product tank.
• Place the cleaning product tank on the lance
handle (3) and lock it by turning it anti-clockwise
(B2).
Storage
Store the pressure cleaned in a room that is
protected from frost.
If you intend to store the cleaner for a lengthy
period, empty it. Standing water will cause
deposits that may prevent the motor from starting.
Store the pressure cleaner out of the reach of
children.
Spray gun safety lock
If the pressure cleaner is stopped during operation,
the safety lock (B4) on the spray gun must be
engaged to prevent the high pressure jet being
activated accidentally.
Installation of the electrical system and water
(B8)
1) Pressure cleaner
2) Water supply hose
3) Water connector
4) Cold water connector
5) High pressure hose
6) High pressure connector
7) Spray gun
8) Mains connection
13