Intended Use; Product Features; Technical Data - Bosch GWS 11-125 CIH Professional Instructions D'emploi

All manuals and user guides at all-guides.com
OBJ_BUCH-194-002.book Page 10 Monday, February 26, 2007 11:14 AM

Intended Use

The power tool is intended for cutting, roughing, and
brushing metal and stone materials without using
water.
For cutting metal, a special protection guard for cut-
ting (accessory) must be used.
For cutting stone, a special extraction hood for cutting
with cutting guide (accessory) must be used.
With approved sanding tools, the machine can be
used for sanding with sanding discs.

Product Features

The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 Dial control for speed preselection
(GWS 15-125 CIEH/GWS 15-125 CITH)
4 On/Off switch

Technical Data

Angle Grinder
Article number
Rated power input
Output power
No-load speed
Grinding disc diameter, max.
Thread of polisher spindle
Kickback stop
Restarting protection
Reduced starting current
Constant electronic control
Speed Preselection
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
10 | English
5 Auxiliary handle
6 Polisher spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for sanding
13 Protection guard for cutting*
14 Grinding/cutting disc*
15 Hand guard*
16 Rubber sanding plate*
17 Sanding sheet*
18 Round nut*
19 Cup brush*
20 Cutting guide with dust extraction protection
guard *
21 Diamond cutting disc*
*The accessories illustrated or described are not
included as standard delivery.
GWS ... 11-125 15-125
Professional CIH CIH
3 601 ... H30 1.. H30 2..
H30 B.. H30 C..
W 1100 1500
W 660 860
rpm 11000 11000
mm 125 125
M 14 M 14
– –
kg 2.1 2.3
/II /II
*
15-125 15-125 15-150
CIEH CITH CIH
H30 3.. H30 4.. H30 5..
H30 D.. H30 E.. H30 F..
1500 1500 1500
860 860 860
2800 2800 9300
– 11000 – 9300
125 125 150
M 14 M 14 M 14
–
2.3 2.3 2.4
/II /II /II
1 609 929 L07 • 26.2.07