Battery Use - CoComm DT200 Guide Rapide

Battery use

●
Never use any charger or battery if damaged. Use the battery correctly. Do
not short-circuit the battery, as this may damage the battery or cause a fire.
●
Do not subject the battery to high temperatures or fire as it may explode.
●
Return the old battery to the dealer, or place it in locations designated for
recycling. Do not throw the battery in household waste.
●
The charging time depends on the remaining battery charge, the type
of battery and charger used. Use only original chargers, batteries and
accessories approved by the manufacturer.
●
The battery can be charged and discharged hundreds of times, but its
duration will gradually decrease.
●
When the operation time is noticeably shorter than normal, replace the
battery with a new one.
●
Disconnect the charger from the electrical plug and the device when the
phone is not in use.
●
Do not overload your battery as it may damage or shorten its life.
●
Do not expose the battery to places of extremely hot or cold temperatures,
as it will reduce the battery capacity. The Li-ion batteries are particularly
affected by temperatures below 0° C.
When the battery level is low, the phone will issue a warning tone and a low
battery message. Connect the power adapter into the device to start charging.
Battery level is indicated on the screen during the charging process, and
once it is fully charged, the battery icon will appear full. Charging a completely
discharged battery can comprise 2 to 3 hours.
Fully charge the battery before using the device for the first time.
Precautions for use
(EN) Quick guide
21