Samsung WD10J6 Serie Manuel D'utilisation page 24

Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:

STEP 6 Turn on the washing machine
Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical
outlet protected by a fuse or circuit breaker. Then, press the Power button to turn on the
washing machine.
24 English
WD10J6410AS_DC68-03628G_EN.indd 24
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
floor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide (A).
A A
Secure the guide to the wall using a hook to
ensure stable drainage.
ln a sink drain pipe
The drain pipe must be above the sink
siphon so that the end of the hose is at least
60 cm above the floor.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the

drain hose is connected to the stand pipe at
a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of 60
litres per minute
2015/6/26 15:19:46