HQ Power VDSCD2000 Notice D'emploi page 8

c. Selecting the Tracks
• Press a SKIP button once to select another track.
• Hold a SKIP button pressed to change tracks rapidly.
• When pressing the FORWARDS SKIP button while playing the last track, the first track will be selected. In
the same way, when pressing the BACKWARDS SKIP button while playing the first track, the last track will
be selected.
d. Starting Playing
• Press PLAY/PAUSE in pause or cue mode to start playing the track. The PLAY indicator lights.
• The point at which the playing starts is automatically stored as the cue point. Pressing the CUE button will
bring you back to that point.
e. Stop the Playing
You can stop the playing in two different ways:
• Press PLAY/PAUSE in play mode to pause at that point.
• Press CUE during in play mode to return to the cue point and to enter in pause mode.
f. Pausing
• Press PLAY/PAUSE to change between the play and the pause mode. The PAUSE indicator lights.
Following figure show the relation between play and pause.
1. Your VDSCD2000 has completed the cue or pause operation and is waiting for the play start command.
2. When pressing PLAY/PAUSE, playing starts and the cue point is stored in the memory.
3. Playing.
4. Pause mode is set when PLAY/PAUSE is pressed again.
5. Pausing.
6. Playing resumes when PLAY/PAUSE is pressed again.
7. Playing.
g. Cueing
Cueing is the action of preparing for playing.
• Press CUE to enter the cue mode. The player returns to the cue point end enters the pause mode. The
CUE and PAUSE indicators light. When pressing PLAY/PAUSE, playing starts from the cue point.
VDSCD2000_v7
All manuals and user guides at all-guides.com
8 HQ POWER