Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
9.10 Plate number (licence plate)
Enter your license plate number with the OK, Up and
Down keys. The license plate is displayed in the recorded
video or photo.
10. Photo settings
In photo mode press the Menu button to access the settings.
Use the Up or Down key to select the parameter you want to
edit. Then press the OK key to save the settings. To exit the
setup menu, press the Menu key again.
10.1 Photo resolution
Set the photo resolution to 2, 5, 8 or 12 MP.
10.2 Photo quality
Adjust the quality of the photo: general, good or very
good.
10.3 White balance
Here you can adjust the white balance: sunny, cloudy,
incandescent light, fluorescence or automatic (factory
setting).
10.4 Contrast
Adjust the contrast of the recording (0 to 5).
10.5 Exposure
Adjust the brightness of the recording (-3 to +3).
10.6 Time Watermark (Date Stamp)
Select whether or not to display the date in the recording.
23
GB
Publicité
Table des Matières
