Operation
A microSD memory card of 8 to 128 GB is required for
operation, insert it into the card slot on the camera.
When the vehicle is started (electricity on cigarette lighter
or power socket) the Dashcam will automatically start recor-
ding. 15 seconds after switching off, it stops automatically
again.
1. Video recording
• Connect the power cable to the USB socket of the camera
and the 12 -24 V DC cigarette lighter or vehicle power so-
cket, press the OK key, the blue LED on the camera flas-
hes during recording. To stop recording, press OK again.
• If you unplug the power cord or press and hold the POW-
ER key, the camera and the blue LED will turn off.
2. G-Sensor
The G-sensor detects a strong decelaration (e. g. in case of
an accident), then the current data is no longer overwritten.
The accident video file has SOS in the file name and is loca-
ted in the SOS storage folder.
3. Parking Monitor (Park Mode)
Select the parking mode, „P" appears in the upper right
corner of the display. If the parking mode is activated and a
strong collision occurs during parking, the camera switches
on automatically and starts recording.
4. Emergency backup (SOS)
In case of an emergency (e. g. in case of an accident) press
the Lock key, then the current data will be saved and no lon-
ger overwritten. The accident video file has SOS in the file
name and is located in the LOCK storage folder.
GB
20