XciteRC Dashcam 4K Ultra HD 3.0“ IPS TFT Mode D'emploi page 22

Operation
9.1 Video resolution
Set the video resolution to 4K Ultra HD, Full HD 1080p
or HD 720p.
9.2 Video quality
Set the quality here: normal, good or very good.
9.3 Loop recording
Set the loop time from when the recording on the memory
card will be overwritten. Factory setting is 1 minute.
9.4 White balance
Here you can adjust the white balance: sunny, cloudy,
incandescent light, fluorescence or automatic (factory
setting).
9.5 Contrast
Set the contrast from 0 - 5 here.
9.6 Exposure
Adjust the brightness of the recording (-3 to +3).
9.7 Power-On recording
Check this box if you want to start video recording after
plugging in the power supply.
9.8 Time Watermark (Date Stamp)
Select whether or not to display the date in the recording.
9.9 Motion Detection
If motion detection is active, the display shows . The
camera starts automatically when it is moved.
22
GB