Base Settings - Topcom Butler E751 Manuel D'utilisateur

Base settings

To access your voice mail :
1 Press and hold the '1'key in standby.
6.13 Paging
You can locate a missing handset by pressing the page key
registered to the base will produce the paging tone and "PAGING" is displayed. You can stop the
paging by pressing any key on the handset or by pressing the page-key
7 Base settings
7.1 Base ring volume
To change the base ring volume:
The volume can be set from 0 to 5.
7.2 Set the flash time
Press the flash key R (key 14 - picture 1D Handset) to use certain services on your external line such
as "call waiting" (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The flash key R is a brief interruption of the line. You can set the flash
time to 100ms, 300ms or 600ms ("SHORT"," MEDIUM" and "LONG"):
1 Enter the menu by pressing the menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "RECALL TIME" and confirm.
4 Select "SHORT", "MEDIUM" or "LONG" and confirm.
7.3 Setting the system PIN code
Certain functions are only available to users who know the PIN code.
By default the PIN code is 0000. To change the PIN code:
1 Enter the menu by pressing the menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "CHANGE PIN" and confirm.
4 Enter the current PIN code and confirm.
5 Enter the new PIN code and confirm.
7.4 First ring tone
You can turn of the first ring tone as followed:
1 Enter the menu by pressing the menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "FIRST RING" and confirm.
4 Select "ON" or "OFF" and confirm.
7.5 Setting the dialling mode
There are two different dialling modes that can be used when making calls:
• DTMF = dual tone multiple frequency, or tone dialling (today's modern dialling mode)
• Pulse dialling (in older devices)
16
All manuals and user guides at all-guides.com
Press the base volume keys to increase or to decrease.
on the base station. All the handsets
again on the base.