Topcom Butler E751 Manuel D'utilisateur page 22

Troubleshooting
Command mode or during playback:
1
2
3
4
5
Turning on/off your answering machine from remote
During remote operation:
1
2
11 Troubleshooting
Symptom
No display
No tone
The icon flashes
Base or handset do not
ring
Not possible to transfer a
call on PABX
Telephone does not react
when pressing the keys
22
All manuals and user guides at all-guides.com
Press '1' to replay the message.
Press '2' to play all messages.
Press '3' to skip to the next messages.
Press '6' to delete the current message.
Press '8' to stop playback.
Press '7' to turn ON.
Press '9' to turn OFF
Possible cause
Batteries uncharged
Handset turned off
Telephone cord badly connected
The line is occupied by another
handset
Handset out of range
The base has no power supply
The handset is not registered on
the base
The ringing volume is off or low
The flash time is too short or too
long
Manipulation error
Solution
Check the position of the batteries
Recharge the batteries
Turn on the handset
Check the telephone cord
connection
Wait until the other handset hangs
up
Bring the handset closer to the base
Check the mains connection to the
base
Register the handset on the base
Adjust the ringing volume
Change the flash time
Remove the batteries and put them
back in place