LENCO DVL-1662BK Mode D'emploi page 4

Masquer les pouces Voir aussi pour DVL-1662BK:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CAUTION:
Usage of cont rols or adjust ment s or performance of procedures ot her t han t hose specified herein
may result e in hazardous radiat ion exposure.
This unit should not be adjust ed or repaired by anyone except qualified service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN M IND:
1.
Do not use t his device near w at er.
2.
Clean only w it h a slight ly damp clot h.
3.
Do not cover or block any vent ilat ion openings. When placing t he device on a shelf, leave 5 cm
(2
"
) free space around t he w hole device.
4.
Inst all in accordance w it h t he supplied user manual.
5.
Don
'
t st ep on or pinch t he pow er adapt or. Be very careful, part icularly near t he plugs and t he
'
cable
s exit point . Do not place heavy it ems on t he pow er adapt or, w hich may damage it . Keep
t he ent ire device out of children
seriously injure t hemselves.
6.
Unplug t his device during light ning st orms or w hen unused for a long period.
7.
Keep t he device aw ay from heat sources such as radiat ors, heat ers, st oves, candles and ot her
heat -generat ing product s.
8.
Avoid using t he device near st rong magnet ic fields.
9.
Elect rost at ic discharge can dist urb normal usage of t his device. If so, simply reset and rest art
t he device follow ing t he inst ruct ion manual. During file t ransmission, please handle w it h care
and operat e in a st at ic-free environment .
10.
Warning! Never insert an object int o t he product t hrough t he vent s or openings. High volt age
flow s t hrough t he product and insert ing an object can cause elect ric shock and/ or short circuit
int ernal part s. For t he same reason, do not spill w at er or liquid on t he product .
11.
Do not use in w et or moist areas such as bat hrooms, st eamy kit chens or near sw imming pools.
12.
Do not use t his device w hen condensat ion may occur.
13.
Alt hough t his device is manufact ured w it h t he ut most care and checked several t imes before
leaving t he fact ory, it is st ill possible t hat problems may occur, as w it h all elect rical appliances.
If you not ice smoke, an excessive build-up of heat or any ot her unexpect ed phenomena, you
should disconnect t he plug from t he main pow er socket immediat ely.
14.
This device must be w ell vent ilat ed at all t ime!
15.
This device must operat e on a pow er source as specified on t he specificat ion label. If you are
not sure of t he t ype of pow er supply used in your home, consult your dealer or local pow er
company.
16.
The socket out let must be inst alled near t he equipment and must be easily accessible.
17.
Do not overload ac out let s or ext ension cords. Overloading can cause fire or elect ric shock.
18.
Devices w it h class 1 const ruct ion should be connect ed t o a main socket out let w it h a prot ect ive
eart hed connect ion.
19.
Devices w it h class 2 const ruct ion do not require a eart hed connect ion.
20.
Keep aw ay from rodent s. Rodent s enjoy bit ing on pow er cords.
21.
Alw ays hold t he plug w hen pulling it out of t he main supply socket . Do not pull t he pow er cord.
This can cause a short circuit .
22.
Avoid placing t he device on any surfaces t hat may be subject t o vibrat ions or shocks.
23.
To prot ect t he device during a t hunderst orm, unplug t he ac pow er adapt or.
24.
When t he device is not in use for long periods, unplug t he ac pow er adapt or for safet y reasons.
25.
To clean t he device, use a soft dry clot h. Do not use solvent s or pet rol based fluids. To remove
severe st ains, you may use a damp clot h w it h dilut e det ergent .
26.
The supplier is not responsible for damage or lost dat a caused by malfunct ion, misuse,
modificat ion of t he device or bat t ery replacement .
27.
Do not int errupt t he connect ion w hen t he device is format t ing or t ransferring files. Ot herw ise,
dat a may be corrupt ed or lost .
28.
The usb memory st ick should be plugged int o t he unit direct ly. Don
cable because it can cause int erference result ing in failing of dat a.
29.
The apparat us shall not be exposed t o dripping or splashing and make sure t hat no object s
filled w it h liquids, such as vases, are placed on or near t he apparat us.
30.
To complet ely disconnect t he pow er input , t he mains plug of t he apparat us shall be
disconnect ed from t he mains, as t he disconnect device is t he mains plug of apparat us.
31.
The mains plug of t he apparat us should not be obst ruct ed or should be easily accessed during
int ended use.
32.
Bat t ery shall not be exposed t o excessive heat such as sunshine, fire or t he like.
33.
M inimum dist ance of 10cm around t he apparat us is needed for sufficient vent ilat ions.
34.
The vent ilat ion should not be impeded by covering t he vent ilat ion openings w it h it ems such as
new spapers, t able-clot hs, curt ains et c.
35.
No naked flame sources such as light ed candles should be placed on t he apparat us.
'
s reach! When playing w it h t he pow er cable, t hey can
4
'
t use an usb ext ension

Publicité

Table des Matières
loading

Table des Matières