For Windows; Installing The Usb Driver Software - Sony MSAC-US5 Mode D'emploi

BInstallation

For Windows

Follow the procedure below to install the USB driver software.
Do not disconnect the mouse from the personal computer until the
installation is completed. You need the mouse for the installation.
When you disconnect the mouse from the personal computer, the
operation is carried out on the keyboard.
Refer to the operating instructions for the keyboard.
–For Windows 2000–
You must log in using administrator's privileges.

Installing the USB driver software

The screens shown in the following procedure are examples. Actual
screens differ according to the OS.
Do not connect this unit to the personal computer at this time.
1
Turn on your machine to start up Windows, and insert the
USB driver software CD-ROM (supplied) into the CD-ROM
drive.
2
Open "My Computer."
3
Open the CD-ROM drive (Sony USB Driver (ex: [D:])).
4
Start up Setup.exe.
9-GB