Tronsmart Apollo Q10 Manuel D'utilisation page 5

How to Reset if the headset is malfunctional?
1. Power on the headset.
2. Press and hold the MFB button and the power button for 5 seconds to
disconnect Bluetooth and enter the pairing mode.
3. When the indicator light flashes red and blue, the pairing setting will be cleared
and reset is completed.
Touch & button control
R Switch three modes
R Play/Pause
R Next track
R Previous track
R Volume +
R Volume -
MFB Activate voice assistant
power off state
hold 2 s
On: 2 s
Press and hold for 3 seconds
Tap twice
Swipe right/forward
Swipe left/back
Slide up
Slide down
Press to activate
03
power on state
Double-click
hold 5 s