Power On/Off - Tronsmart Apollo Q10 Manuel D'utilisation

SPECIFICATIONS
Model
Bluetooth
Speaker unit
Audio codec
Bluetooth transmission
Battery Capability
Power supply
Frequency range
Playtime
Talk time
Sensitivity
Impedance
Charging time
Dimension(mm/inches)
Weight
Power On/Off
Press and hold the power button for 2 seconds to power on/off.
The indicator light status: The indicator light flashes blue. (Power on.)
The indicator light goes off. (Power off)
Bluetooth Pairing with your Device
Under the power off state: Press and hold the power button for 2 seconds. The
indicator light will flash red and blue together with a sound prompt and enter the
pairing mode.
Under the power on state: Double-click the power button to enter the pairing
mode again; If a Bluetooth device is currently connected, it will disconnect the
Bluetooth and enter the pairing mode again.
Apollo Q10
5.0
40mm
SBC, AAC
Up to 15m/49ft (open area)
1200mAh
DC 5V/1.0A(Max), via Type-C port
20Hz – 20KHz
Up to 100 hours (on a 50% volume)
Up to 100 hours (on a 70% volume)
100dB
32 ohms
About 3 hours
196.6 X 174.8 X 80/ 7.74'' X 6.88'' X 3.15''
220 g / 7.76 oz
On: 2 s
02
Off: 2 s